Product parameters

Product model WHB03
support system 支持维宏系统。
How it works Adopt wireless transmission technology，Easy to operate，Transmission distance is greater than 40 meters。
Features 1.Using frequency hopping technology，Strong anti-interference ability；
2.Two AA batteries，Can be used for one month；
typical application 使用维宏系统的机床。

Instructions for use

注释：After turning the axis selection switch from the OFF position，Power switch is on:

  • Install wireless electronic handwheel drive。
  • Open the driver software you just installed。
  • Plug the USB receiver into the USB port of your computer。
  • Start Weihong software，Install the battery on the wireless electronic handwheel and turn it on，Just connect the signal and turn it on。

(For detailed operation instructions, please see the operation video。）

Display screen introduction

Key instructions

取消键 确认键
按下该键，机床复位停止加工 按下该键程序开始或停止
按下该键，中断程序继续运行 按下该键，机床执行对刀操作
按下该键，将当前Z轴位置设置为安全高度 按下该键，机床返回机床原点
按下该键，当前轴坐标值清零 按下该键，当前轴坐标值减半
按下该键1手动模式时，Switch display coordinates；During automatic processing，进行微调 按下该键，控制主轴启停
按下该键，返回机械原点 按下该键，当前轴正向运动
按下该键，当前轴负向运动 按下该键，点动模式和连续模式切换
X、Y、Z file，Feed speed control gear、Spindle speed control gear、手轮引导档 步距精度0.01、0.05、0.1、60%files、Low speed mode、High speed mode

Download information

–Click to download the instruction manual–
–Click to download the driver–

Use operation video

If you have any questions or suggestions，Welcome to contact us!
Global Customer Service Center: 0086-28-67877153
e-mail: xhc@wixhc.com
website: www.wixhc.com
Core Synthesis Technology